New Customer Offer – Don’t Miss Out on Savings

X

Shopping Cart

Free shipping over

Shopping Cart

Beyma PRO6BK 6.5-Inch Midrange Speaker Single

Original price was: $105.00.Current price is: $52.50.
Availability: In Stock
Shipping: Free shipping on orders over $40!

Beyma PRO6BK 6.5-Inch High-Power Midrange

Not every high-output 6.5-inch needs to be crossed at 400 Hz and used strictly for vocals.

The Beyma PRO6BK is for the build that needs a 6.5-inch driver to carry more of the lower midrange while still having enough top-end extension to work as a serious midrange section. Beyma gives it 220 watts AES power handling, 94 dB sensitivity and a published 95 Hz8 kHz range, then recommends a defined rear volume instead of treating the back of the speaker as an afterthought.

Choose the job for a 6.5-inch Beyma driver: If efficient vocals are the priority, compare the PRO6MI; if a lightweight neodymium midbass/midrange suits the installation, see PRO6W/ND. Each requires its own mounting and crossover plan.

That makes the PRO6BK a very different buying decision from the PRO6MI or PRO65ND.

PRO6BK is about usable bandwidth and powernot maximum sensitivity.

The PRO6MI and PRO65ND are the efficiency specialists. They make a lot of output in the dedicated midrange and are happiest when a separate midbass driver is already doing the work below them.

The PRO6BK trades some of that raw sensitivity for more power handling and substantially more low-frequency reach. At 94 dB sensitivity it is still an efficient professional-style driver, but its published 95 Hz lower range gives the system designer more room to bring the midrange section down toward the midbass region.

What that solves: when packaging will not allow a separate large midbass driver directly below the 6.5, the PRO6BK gives us a broader operating window to work with instead of forcing a narrow-band vocal driver to do a job it was never designed for.

220 watts AES gives us real thermal headroom.

Beyma rates the PRO6BK at 220 watts AES / 440 watts program. That is more than double the published continuous power of the PRO6MI and PRO65ND.

That extra thermal capacity matters when the driver is carrying a broader section of the system and doing it for long periods. Lower midrange takes more cone movement and more amplifier energy than a narrowly filtered vocal driver.

The PRO6BK uses a 38.1 mm / 1.5-inch voice coil with a 14 mm winding in a 6 mm magnetic gap. Beyma also publishes a 9.4 N/A BL factor, giving the motor useful control over the moving assembly.

The practical point is simple: this is not a lightweight little factory-replacement speaker. It is built to take real power when the system is designed around it correctly.

The 9-liter rear volume is part of the design.

Beyma publishes a 9-liter / 0.32 cu. ft. recomm

Add a Review

Your email address will not be published. Required fields are marked *

Related Products